 Patented for window production, the RipTec system from Leitz Tooling decreases blow-out on end-grain machining and creates a stronger joint, sealed against water and air penetration. Also used in conjunction with finish planers on four-sided moulders, RipTec virtually eliminates plucked grain in difficult-to-machine woods. When machining curved parts, combination finish knives plus RipTec knives prevent chipping and increase knife performance by as much as 50%.
Leitztooling.com
|
|
|
Three-wing slotting cutters |
|
 Vortex Tool Company, Inc. introduces the Series 6600 three-wing carbide-tipped shank-mounted slotting tools. These bits are constructed from a one-piece precision-machined alloy steel body and brazed carbide tipped construction. Suitable for a variety of applications such as flush trimming and horizontal grooving up to ¾” deep, the line includes five different kerf selections ranging from .075” to .250” and can be used to cut many different types of wood, wood composites, plastics and aluminum.
Vortextool.com
|
|
 Onsrud Cutter LP offers its Tuff Core Compression. The 3/8” diameter tool uses a dual-grade carbide that incorporates a tough inner core for added strength and a wear resistant outer shell for longer life in abrasive materials. The Tuff Core allows feed rates to be increased up to 155% over conventional 3/8” diameter compressions. Standard 1/2” compression tools can be replaced with the stronger 3/8” Tuff Core tool.
www.onsrud.com
|
|
 Completely embedded within AutoCAD, Microvellum Toolbox is designed to generate all the manufacturing information needed for production. The system comes with a library that can be configured to match the user’s construction methods. Shop drawings can be created using the user’s pre-defined library of product information, including materials, parts, hardware, machining and more. Any changes to the shop drawings automatically update all the manufacturing information. www.microvellum.com
|
|
|
Automatic dull tool detection |
|
 MultiCam has introduced automatic dull tool detection capabilities to its line of routers. After setting the normal current draw at the time a new tool is calibrated, the user can set a high current limit. Once the high current limit has been reached and maintained for a continuous period of time, the machine will pause and prompt the user to change the tool.
www.multicam.com |
|
 Upper Canada Forest Products is stocking a full line of industrial panel products. Among the company's offerings are a wide variety of particleboard, MDF, melamine, domestic and imported plywood, as well as hardboard in a variety of dimensions.
www.ucfp.com |
|
 Onsrud Cutter LP offers boring bits for boring heads and gang drills. Brad point and 60-degree through-hole bits are made of solid carbide and mounted in high-speed steel shanks. They are available in right- or left-hand rotation, and in 57 or 70 mm lengths. The bits can be used in solid, composite and laminated wood.
www.onsrud.com |
|
 Onsrud Cutter LP has introduced its polycrystalline diamond PCD line of compression cutting tools for difficult to cut materials. The single-edge tools with mortise tip are designed to provide a chip-free edge on the top and bottom surface of the material. They are offered in 3/8" to 3/4" diameters and can be easily serviced for increased tool productivity.
www.onsrud.com
|
|
|
 Schunk introduces a new balancing machine, Acuro Plus. Basic data input such as desired balancing tolerances in balance quality (optionally G or Q) as well as the specific density of material is done via a menu-driven system.
|
|
Read more...
|
|
 A multi-spur boring bit from Morris Wood Tool is made for use in stationary and portable boring machines. |
|
Read more...
|
|
|
<< Start < Prev 1 2 Next > End >>
|
| Results 1 - 10 of 17 |
